Knowledge
Buyer guides, videos and explainers — from the factory floor.
Specifications explained in plain words, site planning, what BIBS and PEMF actually are, and the questions to ask any hyperbaric chamber manufacturer — including us. Equipment facts only; no medical claims.
VideoVISTA vs LUMEN: same size, different answer
Two chambers that look almost identical from the outside — and the one difference that decides most projects: whether the chamber can be taken apart to get through the door.
VideoWhat is BIBS in a hyperbaric chamber? The 20L vs 10L oxygen system explained
What the mask does, why the chamber air stays fresher, and what changes when you move from the standard 10L all-in-one unit to the 20L unit that powers BIBS.
VideoPEMF built into a hyperbaric chamber seat: how we build and test it
What PEMF means, where the coil pads sit inside the seat, how each seat is tested before it leaves the factory, and which chambers can carry it.
Hard-shell vs soft hyperbaric chambers: what changes between 2.0 ATA and 1.5 ATA
Pressure, construction, weight, main units and installation compared, so you can choose the family before you choose a model.
VideoOxygen systems explained: 10L all-in-one, 20L with BIBS, and what “93%” means
Specification sheets mix several oxygen figures. This guide explains the main unit options, their power requirements, and which number describes what.
How to evaluate a hyperbaric chamber manufacturer: a buyer's checklist
Whether you buy one chamber or a container load, the same questions separate a manufacturer from a reseller and a document from a claim. Use this checklist with any supplier — including us.
VideoPlanning doorway, elevator and room access for a hyperbaric chamber
A chamber that cannot reach the room is the most expensive mistake in a project. Which dimensions matter, how to measure your route, and what our engineers need to check it.
What comes with a hyperbaric chamber: in the crate, and what is not
The crate holds more than the chamber. What is standard on every hard-shell model, which accessories and documents are packed with it, what soft chambers come with, and the four things that are never in the crate.
VideoFrom a 1.5 ATA soft chamber to a 2.0 ATA hard-shell: what actually changes
Many hard-shell buyers already own a soft chamber. The pressure is the reason they upgrade; the weight, the route and the power supply are what they have to plan for. A guide, with a real proposal as the example.
VideoStairs, not a lift: how a hard-shell chamber reaches an upper floor
A staircase defeats a one-piece steel chamber. The answers are modules that come off, a compact model on wheels, or a chamber built in sections light enough to carry — and a flange joint that makes the sections a pressure vessel again.
Electrical requirements for a hyperbaric chamber: volts, watts and amps by main unit
One table answers most of the question; the rest is where the main unit stands and what to tell the electrician before the chamber arrives.
Videos
Watch, right here.
Walkthroughs, explainers and a customer delivery. Players load from YouTube's privacy-enhanced domain only when you press play.
Compare
Five models side by side.
People, posture, size, weight, access width and every option.
Open the comparisonGlossary
Terms, in plain words.
ATA, BIBS, flange, access width, 93% ± 3% and the rest of the vocabulary in our specifications.
Open the glossaryGet a quote
Ask our engineers.
Share the model, destination and timing. Our sales team prepares and confirms every quotation — text messages are enough, and no video call is required.
- WhatsApp +86 181 5756 5885Fastest reply · China Standard Time (UTC+8)
- contact@skelundtech.comSpecifications, drawings and documents on request
- Factory in Zhuji, Zhejiang, ChinaVisits by appointment · no public price list — quotations per project and destination